Half mask Elipse P3 RD with carbon filters (odorless)

Product Description

The Elipse half mask is GVS’s best-selling product. The mask is much smaller and lighter than others of its kind (the mask weighs only 130g!). At the same time being just as effective.

Due to the lightness and smaller dimensions of the mask, it is much more convenient to work with this mask for a long time. The mask is made as comfortable as possible for long-term use and to fit the contour of the face to the maximum.

Thanks to the breathing valve, which prevents air from returning, the generation of moisture under the mask has also been reduced to a minimum.

The mask is also safe to use in humid or wetter conditions. The lashing straps are adjustable in four points, which ensures the best fit and comfort.

Particulate filters use a synthetic HESPA material with very low pressure drop and excellent filtration capacity of 99.95-99.999% (0.3 micron particle size).

The Elipse mask uses silicone-free, latex-free, odorless, non-allergenic, medical-grade materials.

The dimensions of the mask are 93 x 128 x 110 mm

Filter: 12 x 94 x 50 mm

Suitable operating temperature -5 ° C – 55 ° C

The service life of filters depends mainly on the amount and properties of the pollutants in the inhaled air and the frequency of respiration.

The filter is saturated if there is a taste, odor, irritation, or increased breathing resistance. The saturated filter must be replaced immediately.

The areas of application of the Elipse half mask are, for example: removal of varnish and paint, grinding of concrete, stone, wood, putty, welding, soldering, metal cleaning and grinding, demolition in construction, installation of insulation materials etc.

Unlike other half masks, the lower edge of the Elipse half mask should not be placed under the chin, but the edge should be in front of the chin. Only when placed in this way, the necessary tightness is created.

Meets:

ISO 9001: 2008

EN140: 1998 APF 20

BS EN143: 2000 / A1 P3 (R D)

Additional information